FunkyGate features
- Size : 103x75x23 mm,
- Operating temperature : -20°C -> + 80°C,
- Black ABS housing,
- Red and green LEDs + blue LED under the central drawing,
- Single-tone beeper,
- Power supply : 12V DC, 80mA typical, 250mA max powered by the bus when connected through USB,
- 2 tamper sensors.
Contactless / RFID reading
- Multi-protocol Base station (PCD/VCD) in the RFID HF (13.56MHz) band : proximity (standards ISO/IEC 14443 A and B) and vicinity (standards ISO/IEC 15693 and 18000-3),
- Supported contactless smartcards (PICC) (partial list) :
- NXP MIFARE Classic, MIFARE Plus and MIFARE UltraLight, DESFire, ProX, SmartMX,
- Infineon SLE66, STMicroelectronics ST19, Atmel AT88,
- S.T. Microelectronics SR176 and SRiX, ASK CTS256B and CTS512B,
- Inside Contactless PicoTag and HID iClass (serial number only),
- Calypso (incl. Innovatron radio protocol « 14443-B' »)
(some usages of Calypso cards are patented and subject to a license fee - contact us), - NFC objects or mobile phones in 14443 card emulation mode (standards ISO/IEC 18092 and 23917).
- Supported RFID tags and labels (VICC) (partial list) :
- NXP ICODE1, ICODE-SLI,
- Texas Instrument TagIT,
- S.T. Microelectronics LRI.
- Advanced support of NXP MIFARE (MAD) and DESFire (DES/3DES authentication and ciphered communication),
- Support of any T=CL card by a sequence of APDUs,
- RFID transmission : 13.56MHz carrier, baudrate 106 kbps (ISO/IEC 14443), 26kbps (ISO/IEC 15693),
- NXP/Philips Semiconductors RC632 chipset, with CRYPTO1 stream cipher unit and secure storage of MIFARE keys,
- Card operating distance : 0 to 5cm (depending on the card).
Versatile and easy configuration
Configuring FunkyGate (list of cards to be read, output format, ...) is done easily and in a secure manner, even on the field, thanks to « master cards ». The software and the configuration cards are the same for FunkyGate as for RDR-K632, Prox'N'Roll RFID scanner and ProxRunner.
FunkyGate's configuration supports up to 4 type of cards simultaneously, thus allowing to read heterogeneous badges with a single reader.
FunkyGate-DW
FunkyGate-DW is suitable for either RS-485, Dataclock (ISO2 emulation), or Wiegand operation.
RS-485 interface
- 2-wire bus, up to 14 readers may share the bus, max 30m,
- Baudrate : 1200 to 38400 bps,
- Decimal or hexa-decimal ASCII output, length 32 to 128 bits,
- User interface (LEDs et buzzer) is driven by short commands on the serial link.
Dataclock interface
- 2-wire output : DATA and CLOCK (active low), max 30m,
- ISO2/Magstripe output format, 10 decimal digits (40 bits),
- Host controler drives both LEDs directly.
Wiegand interface
- 2-wire output : DATA1 and DATA0 (active low), max 30m,
- Configurable output format (32 to 128 bits),
- Host controler drives both LEDs directly.
FunkyGate-SU
FunkyGate-DW is suitable for either RS-232 or USB operation (virtual serial port).
RS-232 interface
- 3-wire link (RX/TX/ground), max 3m,
- Baudrate : 1200 to 38400 bps,
- Decimal or hexa-decimal ASCII output, length 32 to 128 bits,
- User interface (LEDs et buzzer) is driven by short commands on the serial link.
USB interface
- Powered by the bus (5V, <400mA),
- Serial port emulation (driver SDD100),
- Decimal or hexa-decimal ASCII output, length 32 to 128 bits,
- User interface (LEDs et buzzer) is driven by short commands on the serial link.
FunkyGate-SU is also available as a reader+writer device : FunkyGate/CSB4.
