RDR Features
Contactless / RFID reading
- Multi-protocol Base station (PCD/VCD) in the RFID HF (13.56MHz) band : proximity (standards ISO/IEC 14443 A and B) and vicinity (standards ISO/IEC 15693 and 18000-3),
- Supported contactless smartcards (PICC) (partial list) :
- NXP MIFARE Classic, MIFARE Plus and MIFARE UltraLight, DESFire, ProX, SmartMX,
- Infineon SLE66, STMicroelectronics ST19, Atmel AT88,
- S.T. Microelectronics SR176 and SRiX, ASK CTS256B and CTS512B,
- Inside Contactless PicoTag and HID iClass (serial number only),
- Calypso (incl. Innovatron radio protocol « 14443-B' »)
(some usages of Calypso cards are patented and subject to a license fee - contact us), - NFC objects or mobile phones in 14443 card emulation mode (standards ISO/IEC 18092 and 23917).
- Supported RFID tags and labels (VICC) (partial list) :
- NXP ICODE1, ICODE-SLI,
- Texas Instrument TagIT,
- S.T. Microelectronics LRI.
- Advanced support of NXP MIFARE (MAD) and DESFire (DES/3DES authentication and ciphered communication),
- Support of any T=CL card by a sequence of APDUs,
- RFID transmission : 13.56MHz carrier, baudrate 106 kbps (ISO/IEC 14443), 26kbps (ISO/IEC 15693),
- NXP/Philips Semiconductors RC632 chipset, with CRYPTO1 stream cipher unit and secure storage of MIFARE keys,
- Card operating distance : 0 to 5cm (depending on the card).
Antenna and interface
- Small footprint antenna : 45mm x 69mm x 15mm,
- Ferrite shielding between the antenna and the module,
- 8-pin female connector (JST SHR-08V-S-B), only 4 wires required for normal operation (Vcc + Gnd + RX/TX),
- Power supply : 5V DC, 150mA typical,
- Extended temperature range (-20 to +80 °C).
Versatile and easy configuration
Configuring RDR (list of cards to be read, output format...) is done easily and in a secure manner, even on the field, thanks to « master cards ». The software and the configuration cards are the same for RDR as for Prox'N'Roll RFID scanner, FunkyGate wall mounted reader and ProxRunner.
RDR's configuration supports up to 4 type of cards simultaneously, thus allowing to read heterogeneous badges with a single reader.
A few applications...
- Fast user identication and tracking,
- Loyalty, leisure or exhibition centers,
- RFID asset tracking, logistics,
- RFID asset managements : books, medicines or other valuables.
Available versions :
RDR-TTL
- Serial communication at TTL level (RX/TX at 0/5V),
- Baudrates : 38400bps (default), 115200bps or 9600bps.
RDR-232
- Serial communication according to RS-232 standard (RX/TX at +12/-12V),
- Baudrates : 38400bps (default), 115200bps or 9600bps.
