Home  Products  RDR-K632
RDR-K632

RDR-K632

OEM RFID scanner

RDR-K632 is a ISO/IEC 14443 and ISO/IEC 15693 OEM contactless reader (« reader-only device ») scanning contactless cards/tags : after a scan, the RDR-K632 sends the read data using serial communication.

RDR-K632 is the counterpart of a barcode-scanner, in RFID environment.

Working in serial link, RDR-K632 reads by default serial numbers from virtually any contactless smartcard or tag at 13.56MHz (ISO/IEC 14443 and 15693 standards).

RDR-K632 is also able to fetch data from a memory card (Mifare or other), or from a file in a T=CL smartcard. Reading data from a Desfire card within a secure session (DES/3DES authentication and ciphering) is possible too. The output format is configurable.

RDR-K632 Features

Contactless/RFID

  • Multi-protocol PCD/VCD in the HF RFID range (13.56MHz) : proximity (ISO/IEC 14443) and vicinity (ISO/IEC 15693),
  • Supported contactless smartcards (partial list) :
    • NXP Mifare Classic & Mifare UltraLight, Desfire, ProX, SmartMX,
    • Infineon SLE66, STMicroelectronics ST19, Atmel AT88,
    • STMicroelectronics SR176 and SRiX, ASK CTS256B and CTS512B,
    • Inside PicoTag and HID iClass (serial number only),
    • Calypso (Innovatron radio protocol) (option),
    • NFC objects or mobile phones in 14443 card emulation mode.
  • Supported RFID tags and labels (partial list) :
    • NXP ICODE1, ICODE-SLI,
    • Texas Instrument TagIT,
    • STMicroelectronics LRI.
  • Advanced support of NXP Mifare (MAD) and Desfire (DES/3DES authentication and ciphered communication),
  • Support of any T=CL card by a sequence of APDUs,
  • RFID transmission : 13.56MHz carrier, baudrate 106kpbs (14443) or 26kbps (15693, standard and fast modes),
  • Card operating distance : 0 to 5cm (depending on the card).

Antenna and interface

  • Small footprint antenna : 45mm x 69mm x 15mm,
  • Ferrite shielding between the antenna and the module,
  • 8-pin female connector (JST SHR-08V-S-B), only 4 wires required for normal operation (Vcc + Gnd + RX/TX),
  • Power supply : 5V DC, 150mA typical,
  • Extended temperature range (-20 to +80 °C).

Versatile and easy configuration

Configuring RDR-K632 (list of cards to be read, output format...) is done easily and in a secure manner, even on the field, thanks to « master cards ». The software and the configuration cards are the same for RDR-K632 as for Prox'N'Roll RFID scanner, IWM-K632 wall mounted reader and ProxRunner.

RDR-K632's configuration supports up to 4 type of cards simultaneously, thus allowing to read heterogeneous badges with a single reader.

A few applications...

  • Fast user identication and tracking,
  • Loyalty, leisure or exhibition centers,
  • RFID asset tracking, logistics,
  • RFID asset managements : books, medicines or other valuables.

Product family

RDR-K632-TTL

  • Serial communication at TTL level (RX/TX at 0/5V),
  • Baudrates : 38400bps (default), 115200bps or 9600bps.

RDR-K632-232

  • Serial communication according to RS-232 standard (RX/TX at +12/-12V),
  • Baudrates : 38400bps (default), 115200bps or 9600bps.

How to buy...

  • SpringCard products are available worldwide. Please contact the local office closest to you.
  • If you want to open an account and place an order directly, please click here.