Prox'N'Roll RFID scanner features
Contactless / RFID reading
- Multi-protocol Base station (PCD/VCD) in the RFID HF (13.56MHz) band : proximity (standards ISO/IEC 14443 A and B) and vicinity (standards ISO/IEC 15693 and 18000-3),
- Supported contactless smartcards (PICC) (partial list) :
- NXP MIFARE Classic, MIFARE Plus and MIFARE UltraLight, DESFire, ProX, SmartMX,
- Infineon SLE66, STMicroelectronics ST19, Atmel AT88,
- S.T. Microelectronics SR176 and SRiX, ASK CTS256B and CTS512B,
- Inside Contactless PicoTag and HID iClass (serial number only),
- Calypso (incl. Innovatron radio protocol « 14443-B' »)
(some usages of Calypso cards are patented and subject to a license fee - contact us), - NFC objects or mobile phones in 14443 card emulation mode (standards ISO/IEC 18092 and 23917).
- Supported RFID tags and labels (VICC) (partial list) :
- NXP ICODE1, ICODE-SLI,
- Texas Instrument TagIT,
- S.T. Microelectronics LRI.
- Advanced support of NXP MIFARE (MAD) and DESFire (DES/3DES authentication and ciphered communication),
- Support of any T=CL card by a sequence of APDUs,
- RFID transmission : 13.56MHz carrier, baudrate 106 kbps (ISO/IEC 14443), 26kbps (ISO/IEC 15693),
- NXP/Philips Semiconductors RC632 chipset, with CRYPTO1 stream cipher unit and secure storage of MIFARE keys,
- Card operating distance : 0 to 5cm (depending on the card).
Keyboard emulation
- Prox'N'Roll RFID scanner's USB interface complies with « Human Interface Device » profile,
- It is seen as a standard PC keyboard on most operating systems (Windows, Linux, MAC, ...) without installing a driver,
- When a card enters its RF field, Prox'N'Roll RFID scanner sends either the card's serial number (UID, PUPI, ...) or any data read from the card's memory as key-strokes,
This behaviour makes it possible to replace barcode scanners by RFID scanners with not dev !
Versatile and easy configuration
Configuring Prox'N'Roll RFID scanner (list of cards to be read, output format, ...) is done easily and in a secure manner, even on the field, thanks to « master cards ». The software and the configuration cards are the same for FunkyGate as for RDR-K632, FunkyGate wall-mounted reader and ProxRunner.
Prox'N'Roll RFID scanner's configuration supports up to 4 type of cards simultaneously, thus allowing to read heterogeneous badges with a single reader.
A few applications...
- Fast user identication and tracking,
- Loyalty, leisure or exhibition centers,
- RFID asset tracking, logistics,
- RFID asset managements : books, medicines or other valuables.
